œ Soft or Annealed Copper Wire/Tinned
Soft or Annealed Copper Wire
œ Annealed Bunch-Stranded Copper Wire
œ Tinned Annealed Bunch-Stranded Copper
Wire
œ Concentric-Lay Wire
œ Bonded Wire Conductors
œ Rope-Lay Conductors
œ Stranded Copper Wire With Polyester
Fiber
| áSoft or Annealed Copper Wire/Tinned Soft or Annealed Copper Wireâ |
| Type | Composition | Manufacturing Range |
Representative Samples |
AWG |
| A |
|
0.03mm to 0.32mm |
0.03A 0.18A 0.32A |
#49 #33 #28 |
| Multiple Wires | 0.03mm to 0.32mm |
0.10A _ 3W 0.12A _ 7W 0.16A _ 3W |
||
|
|
Single Wire | 0.03mm to 0.32mm |
0.03TA 0.18TA 0.32TA |
#49 #40 #20 |
|
|
0.03mm to 0.32mm |
0.10A _ 3W 0.12A _ 7W 0.16A _ 3W |
||
| ATTENTION!! Please feel free to contact us, re:take-up spool sizes. | ||||
| áAnnealed Bunch-Stranded Copper Wireâ |
| Manufacturing Range | Representative Sample | AWG | |
| Diameter (‡o) for Single Wire |
Number of Stranded Wires | ||
| 0.03 0.04 0.05 0.06 0.08 0.10 0.12 0.127 0.14 0.16 0.18 0.20 0.23 0.26 0.29 0.32 |
7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 70 7 to 70 7 to 70 |
10/0.03A Pt 6 30/0.05A Pt 15 100/0.08 Pt 30 112/0.12A Pt 30 10/0.14A Pt 15 41/0.16A Pt 25 50/0.18A Pt 40 37/0.26A Pt 40 70/0.32A Pt 60 |
#39 #30 #21 #16 #26 #18 #16 #14 #10 |
|
*or to the right-hand depending on customer's requirements. * Please feel free to contact us, re: take-up spool sizes. | |||
| áTinned Annealed Bunch-Stranded Copper Wireâ |
| Manufacturing Range | Representative Sample | AWG | |
| Diameter (‡o) for Single Wire |
Number of Stranded Wires | ||
| 0.03 0.04 0.05 0.06 0.08 0.10 0.12 0.127 0.14 0.16 0.18 0.20 0.23 0.26 0.29 0.32 0.40 0.45 |
7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 150 7 to 70 7 to 70 7 to 70 |
10/0.03TA Pt 6 30/0.05TA Pt 15 100/0.08TA Pt 30 16/0.12TA Pt 13 41/0.16TA Pt 20 50/0.18TA Pt 40 37/0.26TA Pt 40 70/0.32TA Pt 60 9/0.45TA Pt 60 |
#39 #30 #21 #16 #26 #18 #16 #14 #10 |
|
*or to the right-hand depending on customer's requirements. * Please feel free to contact us, re: take-up spool sizes. | |||
| áConcentric-Lay Wireâ |
| Composition | Type | Manufacturing Range | Representative Samples | |
|
|
A | Number of Wires/Diameter | AWG | 7/0.05A Pt4 7/0.05TA Pt4 7/0.12TA Pt6 7/0.45TA Pt15 |
| 7/0.05mm | 7/0.45mm |
#36 | #17 | |||
| TA | 7/0.05mm | 7/0.45mm |
| #17 | ||
| Composition | Type | Manufacturing Range | Representative Samples | |
|
|
UL | Number of Wires/Diameter | AWG | 19/0.08TA Pt6 19/0.29A Pt30 |
| 19/0.05mm | 19/0.32mm |
#32 | #16 | |||
| UD | 19/0.05mm | 19/0.32mm |
| #16 |
19/0.08TA 1Pt6 19/0.08TA 2Pt6 19/0.32A 1Pt20 19/0.32A 2Pt20 | |
| Composition | Type | Manufacturing Range | Representative Samples | |
|
|
UL | Number of Wires/Diameter | AWG | 37/0.26A Pt35 |
| 37/0.08mm | 37/0.32mm |
#25 | #13 | |||
| UD | 37/0.08mm | 37/0.32mm |
| #13 |
37/0.26A 1Pt35 37/0.26A 2Pt40 | |
|
*or to the right-hand depending on customer's requirements. * Please feel free to contact us, re: take-up spool sizes. | ||||
| áBonding Wire Conductorsâ |
| Type |
Number of Wires/Diameter |
Representative Samples |
AWG |
| ATS (Z) TTS (Z) |
7/0.08mm | 7/0.32mm |
7/0.08 ATS Pt5 7/0.127 ATS Pt6 7/0.32 ATS Pt8 |
#32 #28 #20 |
| ATCS (Z) TTCS (Z) |
7/0.08mm | 7/0.32mm |
7/0.08 ATCS Pt5 7/0.127 ATCS Pt6 7/0.32 ATCS Pt8 |
#32 #28 #20 |
| HB|ATS (Z) HB|TTS (Z) |
7/0.08mm | 7/0.32mm |
7/0.08 ATCS Pt5 7/0.127 ATCS Pt6 7/0.32 ATCS Pt8 |
#32 #28 #20 |
|
*or to the right-hand depending on customer's requirements. * Please feel free to contact us, re: take-up spool sizes | |||
| áRope-Lay Conductorsâ |
| Composition | Type | Manufacturing Range #of Ropes/#of Wires/DIA. |
Representative Samples |
AWG |
| Tubular | A | 3/17/0.05mm „ 3/7/38/0.16mm |
3/70/0.05A 1Pt 3/70/0.05A 2Pt 3/7/38/0.16A 1Pt 3/7/38/0.16A 2Pt 3/7/38/0.16A 3Pt 3/7/0.12TA 1Pt 3/7/0.12TA 2Pt 3/17/0.16TA 1Pt 3/17/0.16TA 2Pt 3/17/0.16TA 3Pt |
#21 #6 #24 #18 |
| TA | 3/17/0.05mm „ 3/7/38/0.16mm | |||
| TUBULAR ROPE: a common rope-lay conductor, the inside lay of which is done by a double-twist-buncher, and the outside lay of which is done by a tubular. The lay directions of the inside and outside are different. It is also possible to have the same lay length. | ||||
| Composition | Type | Manufacturing Range #of Ropes/#of Wires/DIA. |
Representative Samples |
AWG |
| Buncher | A | 3/17/0.05mm „ 7/70/0.12mm |
3/70/0.05A 1Pt 3/70/0.05A 2Pt 3/70/0.05TA 1Pt 3/70/0.05TA 2Pt 3/7/0.12TA 1Pt 3/7/0.12TA 2Pt 7/7/0.12TA 1Pt 7/7/0.12TA 2Pt |
#21 #21 #24 #20 |
| TA | 3/17/0.05mm „ 7/70/0.12mm | |||
| BUNCHER ROPE: Both inside-and-outside lays are stranded by a double-twist-buncher. Therefore the processing speed is improved and consequently the cost can be lowered. The lay directions of the inside and outside are different.The lay direction of the stranded wires can be either to the left-hand or to the right-hand depending on customer's requirements.Please feel free to contact us, re: take-up spool sizes. | ||||
|
*or to the right-hand depending on customer's requirements. * Please feel free to contact us, re: take-up spool sizes | ||||
| áStranded Copper Wire with Polyester Fiberâ |
| Composition | Type | Manufacturing Range Number of Wires/Diameter |
Representative Samples |
AWG |
| Bunch Stranded |
A | 20/0.04mm „ 150/0.12mm |
17/0.05A-TRN1 Pt5 17/0.05TA-TRN1 Pt5 20/0.05A-TRN2 Pt5 83/0.08A-TRN3 Pt17 |
#32 #32 #31 #21 |
| TA | 17/0.05mm „ 150/0.12mm | |||
| TRN 1: It stands for one thread of Tetron. The common type of Tetron is 250d Tetron. The number and size of thread is at the customer's discretion. Polyamide-imide typed thread can be also processed. | ||||
| Composition | Type | Manufacturing Range Number of Wires/Diameter |
Representative Samples |
AWG |
| Rope Type | Tubular |
„ 7/100/0.08mm |
3/20/0.05A-TRN2 1Pt5 3/20/0.05A-TRN2 2Pt10 7/70/0.08TA-TRN3 1Pt10 7/70/0.08TA-TRN3 2Pt15 |
#27 #14 |
| Buncher | 3/17/0.05mm „ 7/100/0.05mm |
3/70/0.05A 1Pt 3/70/0.05A 2Pt 3/70/0.05TA 1Pt 3/70/0.05TA 2Pt |
#27 #14 | |
| BUNCHER ROPE: Both inside-and-outside lays are stranded by a double-twist-buncher. Therefore the processing speed is improved and consequently the cost can be lowered. The lay directions of the inside and outside are different.The lay direction of the stranded wires can be either to the left-hand or to the right-hand depending on customer's requirements.As to take-up spool sizes, please refer to the table on the last page. | ||||
|
*or to the right-hand depending on customer's requirements. * Please feel free to contact us, re: take-up spool sizes | ||||